ATLAS WIRE LOCK SYSTEM
Does not pinch, bind or weaken the material it secures. Can be installed around
gable-ends by cutting out V's out of channel. Film can be removed and reinstalled
seasonally.
|
WIRE LOCK ALUMINUM CHANNEL
Can be secured to either wood, steel or aluminum members with self drilling
screws. Can be conveniently secured to the top of a greenhouse bow and will
conform to almost all degrees of curves. 8 foot long. NOTE: if C-channel is
shipped, add the UPS non-box charge of $6.00.
|
STAINLESS STEEL SPRING WIRE
Two wires can easily be installed into aluminum C-channel, locking up to 4
layers of poly film. 4 foot long each. 2 oz each
|
WHITE VINYL BATTEN TAPE
For securing plastic film to wood frame greenhouses, cold frames, etc. Just
staple or nail every 3-4" while holding tape tight. 3/4" wide 3/32" thick X 500' #
1024 Wt 8 LB
|
GREENHOUSE POLY BLOWER
This blower is used to inflate 2 layers of polyethylene film to conserve heat. It has been reported that up to
40% savings in heat cost have been realized with this system. The greenhouse is also more rigid for snow or
wind loads than a single layered greenhouse.
|
BLOWER MOUNTING KIT
Designed to be used with the greenhouse blower above. Contains mounting plate, plastic bushing, nuts and
screws. Can be mount flat or to a bow. Wt 1 LB
|
FLEXIBLE JUMPER KIT
For use in connecting double layer polyethylene from roof to wall to pressurize walls. 18" long black corrugated
hose with simple twist on fittings.
|
POLY PATCH GREENHOUSE TAPE
A rugged patching tape for preventive maintenance in areas of extra stress and for mending. Lasts up to 2 years.
|
Size
|
Price Order
|
2" X 48'
|
|
4" X 48'
|
|
6" X 48'
|
|
|
To return to this page after ordering, click Back
Greenhouse Building Supplies
Greenhouse & High Tunnel Parts
