Building Kits, Building Parts, Building Accessories

Placeholder
#12 self tap/drill screws

Known as TEK screws.

not rated $3.25$4.95 Select options
1.315 brace clamp
1.315 brace clamp

Goes all the way around the pipe and can be hooked to something else like the 2×4 end piece.

not rated $0.55 Add to cart
1.315 pipe strap
1.315 pipe strap

Goes half way around pipe and holds pipe in place.

not rated $0.50 Add to cart
Placeholder
1.315″ Pipe

All 1.315″ material below is 14 gauge & galvanized inside & out.

12′, p. pipe, swedged 1 end, 14 lb
12′ with 2 flattened ends, 14 lb
117″ with 2 flattened ends, 11 lb
111″ with 2 flattened ends, 10 lb
84″ with 2 flattened ends, 8 lb
72″ with 2 flattened ends, 7 lb

not rated $10.20$15.85 Select options
1/8″ cable

1/8″ steel cable. Used primarily for side wall curtains. Sold by the foot.

not rated $0.15 Add to cart
Placeholder
10 ft curtain conduit

Used on top of drop down curtain.

not rated $5.50 Add to cart
Placeholder
10×1.5′ Hex Head Wood Scews

# 12 x 1″ wood screw. 5/16″ hex head. 100/PKT 1 lb

not rated $5.00 Add to cart
2 3/8" brace clamp
2 3/8″ brace clamp

Goes all the way around the pipe and can be hooked to something else like the 2×4 end piece.

not rated $0.80 Add to cart
2 3/8" pipe strap
2 3/8″ pipe strap

Goes half way around pipe and holds pipe in place.

not rated $0.75 Add to cart
2x4 end piece for clamping
2×4 end piece for clamping

Used to fasten 2×4’s to 2 3/8

not rated $1.25 Add to cart
3/16 Nylon Rope

3/16″ Woven Nylon Rope.

not rated $36.00 Add to cart
3/8″ Machine bolt

3/8″ x 4 1/2″ carriage bolt, nut & washer 1 each

not rated $0.75 Add to cart
5/16″ carriage bolt

5/16″ x 1 1/2″ or 2 1/2″ carriage bolt w/nut  

not rated $0.30$0.35 Select options
Aluminum Tape
Aluminum Tape

Used to tape bottom holes of polycarbonate to
keep out moisture and insects. 2″ x 150′.

not rated $13.50 Add to cart
Angle pulley

Allows cable to make a 90 degree turn.

not rated $18.00 Add to cart
Placeholder
Auto shutter motor kit

Used to open and close shutters when exhaust fan operates.

not rated $95.00 Add to cart
Crank Handles

Crank handles that work with a roll up gear. Comes in 30″ or 96″ lengths. 30″ shown

not rated $19.00$40.00 Select options
curtain material

Woven plastic fabric used for drop down curtains.

not rated $1.15$1.45 Select options
Curtain weight

Used to pull slack out of curtain cable.

not rated $14.00 Add to cart
DINKY SOIL MIXER TRAY POT FILLER.

Looking for an economically priced pot or tray filler? The Dinky is what you are looking for. Locally made here in Missouri. With it’s variable speed reel mixer, it controls the density of the soil. Works great to break up soil chunks. Filler heights are adjustable to fit the pot heights or trays you are filling. Auger bringing soil to … Read More

not rated $500.00$6,500.00 Select options
Double H Channel
Double H Channel

Used to join two pices of polycarbonate together.

not rated $6.75 Add to cart
Double Wall Polycarbonate

Double Wall Polycarbonate

ALUMINUM EXTRUSIONS FOR POLYCARBONATE
END BOW WIRE LOCK
Used on end bows. Bends with curve of bow and needs to be
Tex screwed every 12″. Cut polycarbonate to fit curve of bow.
Slip polycarbonate into flange. Roof poly fastens to C-channel
with stainless steel spring wire. 8′ long. Can be UPS or Fed Ex
SINGLE h CHANNEL
Used on ends of polycarbonate sheets. Screw on with Tex if used
on metal or Screw10 if wood end walls. 8′ long. 1 1/2 lb each.
DOUBLE H CHANNEL
Used to join two pieces of polycarbonate together.
Screw to steel side walls with Tex screws or
if attached to wood, use Screw10. 8′ long. 2 lb.
ALUMINUM TAPE
Used to tape bottom holes of polycarbonate to
keep out moisture and insects. 2″ x 150′.
VENT TAPE
Used on top end of polycarbonate to vent heat or moisture.
1 1/2″ x 180′
WHITE FELT TAPE
Used to protect poly from greenhouse bows. 1″ x 48′.

not rated $5.50$83.85 Select options
Dripper Assemblies/Emitters

Anti-drain button emmitter. To be used with multi-outlet dripper assemblies. Pressure compensating. 3.0 GPH

Button emitter. 1 GPH at 10 PSI.1/8″ barb that pops into tubing or 1/8″ spaghetti tubing none-pressure compensating.

Double ended emitter. Pops in tubing with other end you can add a 1/8″ spaghetti tubing to run to each plant. Pressure compensated

Jain Jet

10-32 outside threads. 10.7 gph at 20 psi 12′ pattern.

Acu-Mister
360° mister with 10-24 buttress triple-lead fast threads. Makes a tight fit when installed orchard tubing or headerline. Rate from 10 to 30 PSI. Misting diameter: 4.5′ to 6.5′

SPRAY STICK
Non-pressure compensating spray stick with shut-off holes. Sprays 11″ circle. Used 1/8″ tube. Gray 3.0 gph @ 20 psi.  Green 11.4 gph @ 20 psi

Chapin

Pressure compensating weighted drip tubes Use to water hanging basket and potted plants. Use with punch # 991. 36″ long tube.

“SPT” type for pots. Green.

Red shut off valve. Has 1/4″ barbs.

 

You must click 1 choice in each level to get a price

not rated $0.30$214.00 Select options
End Bow Wire Lock

Used on end bows. Bends with curve of bow and needs to be Tex screwed every 12″. Cut polycarbonate to fit curve of bow. Slip polycarbonate into flange. Roof poly fastens to C-channel with stainless steel spring wire. 8′ long. Can be UPS or Fed Ex shipped.  3 lb each.

not rated $10.00 Add to cart
Placeholder
End Plate

2 3/8″ end plate

not rated $2.00 Add to cart